Auto Wastewater Pretreatment Machine Mechanical Bar Screen

Mechanical Bar Screen in Bangladesh:

A equipment that can make separation of solid at the time of in wastewater in your plant.  For screening solid particle from in fluent of your plant use mechanical bar screen to get best performance. We are Mechanical Bar Screen Supplier in Bangladesh.

HLCF Mechanical Bar Screen is provided with several special-shaped teeth which are assembled on the teeth axis based on certain ordering, forming the sealed teeth chain. The lower part is installed in the water inlet. If the chain wheel rotates directionally with even speed, the whole rake chain will move accordingly. Under such circumstance, the solid sundries attached on the tooth will be separated from liquid and the fluid will low away through the gap. When rake chain arrives at its upper end, each group of rakes will carry on self cleaning by dropping out most of the solid material under gravity and guideline rail, while the rest of the solid will be tidied clean by back running brush.The whole process is carried out continuously and automatically so as to achieve the goal of solid-liquid separation. Click Here to know more.

Typical Applications:

This is a kind of advanced solid-liquid separation device in water treatment, which can continuously and automatically remove debris from wastewater for sewage pretreatment. It is mainly used in municipal sewage treatment plants, residential quarters sewage pretreatment devices, municipal sewage pumping stations, waterworks and power plants, also it can widely be applied to water treatment projects of various industries, such as  textile, printing and dyeing, food, fishery, paper, wine, butchery, curriery etc.

Technical Parameters

Model /Parameter

HLCF-500

HLCF-600

HLCF-700

HLCF-800

HLCF-900

HLCF-1000

HLCF-1100

HLCF-1200

HLCF-1300

HLCF-1400

HLCF-1500

Device Width B(mm)

500

600

700

800

900

1000

1100

1200

1300

1400

1500

Channel Width B1(mm)

B+100

Effective Grille Spacing B2(mm)

B-157

Anchor Bolts Spacing B3(mm)

B+200

Total Width B4(mm)

B+350

Teeth Spacing b(mm)

t=100

1≤b≤10

t=150

10<b≤50

Installing Angle α(°)

60-85

Channel Depth H(mm)

800-12000

Height Between Discharge Port and Platform H1(mm)

600-1200

Total Height H2(mm)

H+H1+1500

Back Rack Height H3(mm)

t=100

≈1000

t=150

≈1100

Screen Speed v(m/min)

≈2.1

Motor Power N(kw)

0.55-1.1

0.75-1.5

1.1-2.2

1.5-3.0

Head Loss(mm)

≤20(no jam)

Civil Load

P1(KN)

20

25

P2(KN)

8

10

△P(KN)

1.5

2

Note：Pis calculated by H=5.0m,for every 1m H increased,then P total=P1(P2)+△P
t:rake tooth pitch coarse:t=150mm
fine:t=100mm

Model /Parameter			HLCF-500	HLCF-600	HLCF-700	HLCF-800	HLCF-900	HLCF-1000	HLCF-1100	HLCF-1200	HLCF-1300	HLCF-1400	HLCF-1500
Flow Depth H3(m）			1.0
Flow Velocity V³(m/s)			0.8
Grid Spacing b(mm)	1	Flow Rate Q(m³/s)	0.03	0.04	0.05	0.06	0.07	0.08	0.08	0.09	0.10	0.11	0.12
	3		0.07	0.09	0.10	0.12	0.14	0.16	0.18	0.20	0.22	0.24	0.26
	5		0.09	0.11	0.14	0.16	0.18	0.21	0.23	0.26	0.28	0.31	0.33
	10		0.11	0.14	0.17	0.21	0.24	0.27	0.30	0.33	0.37	0.40	0.43
	15		0.13	0.16	0.20	0.24	0.27	0.31	0.34	0.38	0.42	0.45	0.49
	20		0.14	0.17	0.21	0.25	0.29	0.33	0.37	0.41	0.45	0.49	0.53
	25		0.14	0.18	0.22	0.27	0.31	0.35	0.39	0.43	0.47	0.51	0.55
	30		0.15	0.19	0.23	0.27	0.32	0.36	0.40	0.45	0.49	0.53	0.57
	40		0.15	0.20	0.24	0.29	0.33	0.38	0.42	0.46	0.51	0.55	0.60
	50		0.16	0.2	0.25	0.29	0.34	0.39	0.43	0.48	0.52	0.57	0.61

Why Use Mechanical Bar Screen?
High separation efficiency
Low power consumption
Good corrosion resistance
Low noise

Contact Us to get special offer.